The Internet has enabled the wisdom of the crowds like never before. B2B Exchange brings that
wisdom straight to you by collecting the comments and questions of other spray paint booth buyers as they tackle
business purchasing head on. If you’re not sure what to be looking for in your next spray paint booth , check out
the most common thoughts, fears and ideas shared by your fellow business purchasers.
“We are an aerospace fastener company based in Torrance, CA. At the end of the manufacturing process of our Titanium Pins, we are coating them by spraying a product called Hi-Kote. We currently have different systems handling these processes, both manual and automated. We are looking at upgrading (retrofitting) our current manual spray booth in order to be able to spray more toxic product (containing chrome).”
- Owner, Aerospace technology, Torrance, CA
“We recycle woven poly bags of various sizes. We are trying to reduce the dry power dust associated with cleaning of the bags. In addition, we also want to use air spray guns to clean the outside of the bags in a modified closed environment. We have a vaccum system that will take the residue out from the bottom of the bag, but want all to be contained in a modified closed room setting.”
- General manager, Manufacturing, Cedar Falls, IO
“The overall inside dimensions of this bench spray booth would be 5' x 4' x 3' and would need to be installed unless it comes assembled. Need it to be vented outside, be OSHA approved w/ exhaust/motor, filters, etc. I also need the weight as well with a shipping estimate. If the weight is over 200 lbs, it will need to be delivered and installed. I will need detailed line item quotes. Thank you!”
- Foreman, Construction, Staten Island, NY
“We are considering buying two booths. One each for spray painting and sandblasting glass. We'll be attaching these to our new warehouse dock and have them extend out into a exterior bay. We will be creating a platform for them to sit on in that bay. We want to have commonly-available filter sizes and type for the air equipment as well as good lighting.”
- Facilities operator, Manufacturing, Algona, WA
“We need a spray booth for applying acrylic-based clear coating to fine art reproductions. Our prints vary from very small to as large as 12' W x 54" H. This booth doesn't need to be very deep since the art is on canvas. I don't have a big budget so would prefer spending $2,000 or less if possible. Booth to be installed in a flex space warehouse.”
- Owner, Art services, Bozeman, MT
“Facilities currently have no HVAC, so a heating/cooling system will need to treat air coming into the booth like it would a seperate building. The booth is proposed to be installed in a truck parking bay. A long series of hooks, or a long coat rai,l will need to be installed along the 20' side to support all the fiber-glass poles being repaired & painted.”
- Office manager, Construction/General contracting, Scottsdale, AZ
“Global finishing solutions select semi-downdraft spray booth, powder coated, 2 wing entrance door, 10'x9'. 10 4-tube light fixtures, one personal door w/ observation window, 34" exhaust fan, 3HP 3-phase exhaust motor, 12,000 CFM, 2 obv. windows, plenum for future heater, roof flashings, and prices for direct fired air replacement system.”
- President, Automotive services, Thomasville, GA
“We manufacture overhead traveling bridge cranes and handle these cranes by lifting and moving them with our own overhead traveling bridge crane. We are trying to locate a booth design with a top slot that will allow our crane cables to enter down the length of the booth and exhaust out of the top through our roof.”
- Foreman, Construction, Medina, OH
“We're a retail merchandise supplier. We construct much of the products we supply as an in-house prototype to form our rapid prototype equipment. Many of the prototypes require Powder Coat, which must go outside for processing. We would like to control and run the powder coating process in our own engineering lab.”
- Manager, Retail, Cupeper, VA
“This booth is for a University's architecture program. It will be used mostly for spray paint, but also for finishing furniture and architectural installations. We are located in a basement and will probably need some custom work to make this fit due to existing HVAC and plumbing.”
- University headmaster, Non-profit, Ringgold, GA
“Utilizing HVLP spray guns to spray Dow Corning 1-2620 low VOC conformal coating substance onto PCB (electronics assembly). Inquiry on bench paint booths with a variety of fumes, filtration configuration generated from substance use, and spray method if information is available.”
- CEO, Business services, Kennewick, WA
“The spray booth is for my client and will primarily be used for the finishing of furniture. It will be installed in a cellar. I am concerned about obtaining adequate exhaust & make-up air in this proposed location. I appreciate your advice.”
- Consultant, Business services, El Paso, TX
“We have a semi-downdraft booth. We would like to know if you can provide information/equipment to change over to a modified downdraft booth? We would buy the required materials from you.”
- Administrative assistant, Automotive services, Cambridge, MA
“We need the booth to be modular for ease of relocation. Spraying Chromium VI primer, needs to have breathing air supply for operator. Also, HEPA filtration exhaust required and should be capable of environmental control inside booth. Temperature requirements: 73F+/-5 deg.); humidity: rH% 35-55.”
- General manager, Manufacturing, Davisville, MO
“I spray gelcoat and final paint work on fiberglass model radio controlled boats. The boats are typically 50" and I usually hang them in order to clearcoat the entire hull.”
- Owner, Retail, Laguna Niguel, CA
“To be used for spraying small panels in a color formulation laboratory. Either need one large booth able to handle 4 spray stations or individual booths. Most cost-effective solution is essential. Will consider used equipment.”
- Researcher, Non-profit, Lafayette Hill, PA
“Powder coating of tubular steel auto. chassis. Prime + base/clear spray painting of fiberglass body panels. Also seeking media blasting booth and equipment for prep./stripping of chassis.”
- Auto body specialist, Automotive services, Clayton, OH
“The booth would be used to cure resins and would be required to reach 250°F. Ventilation is not necessary due to the method of material processing. Dimensions given are approximate; other dimensions may also be considered.”
- Manager, Business services, Round Rock, TX
“We will utilize the two booths for finishing work on guitars. Each booth will need to be OSHA approved with a ventilation and fire suppression system. We use water-based and nitrocellulose lacquer, paints and stains.”
- Partner, Retail, Hartford, CT
“My paint booth has to be long enough to fit an extended cab long box truck. If applicable, should be wide enough to comfortably walk around and spray. Also needs several filters and a high output crossflow exterior exhaust fan.”
- Operations coordinator, Trucking, Haltom City, TX
“The main things we require are lights and a filtration/vent system. We are looking into using only water-based paints as well. If there is a difference in booths, please provide quotes for both.”
- General manager, Automotive services, Miami, FL
“We are looking for a booth in which we can disassemble gasoline meters which will have some residual gasoline in them. Our primary concern is safety and minimizing exposure of nearby people from the fumes. ”
- Head foreman, Construction, Nutley, NJ
